Paper core Automotive Accessories motorcycle engine oil filter fit for GS GN250 NS200 LC135 BM150 SHOGUN TVS-KING

Product Introduction

Paper core Automotive Accessories motorcycle engine oil filter fit for

GS GN250 NS200 LC135 BM150 SHOGUN TVS-KING.

The motorcycle oil filter element, also known as the oil filter or

machine filter, is a critical component in motorcycle engines. Its

main function is to filter impurities, gum, and moisture in the engine

oil, ensuring that clean oil is delivered to all lubrication parts of the

engine. This can reduce the frictional resistance between the relative

moving parts in the engine, reduce component wear, thereby

protecting the engine and extending its service life.

The replacement cycle of motorcycle oil filter element (i.e. oil filter

element) is 4000 to 6000 kilometers. However, this replacement

cycle is not absolute and may vary depending on the vehicle model,

usage environment, and driving habits.

The following points may affect the replacement cycle of the oil filter

element:
Vehicle model differences: Different brands and models of

motorcycles may have different engine designs and oil circulation

systems, so the replacement cycle of the oil filter may also vary. It is

recommended that car owners refer to the recommendations in the

vehicle manual for the most accurate replacement cycle information.
Usage environment: If the motorcycle is frequently driven in harsh

environments such as dusty, humid, or high-temperature areas,

more impurities and moisture may be mixed into the engine oil,

accelerating the clogging and aging of the oil filter element. In this

case, the car owner may need to replace the oil filter element in

advance.
Driving habits: Intense driving or prolonged high load operation

can cause the engine to produce more sludge and impurities,

which can accelerate the clogging of the oil filter. Therefore,

driving habits are also an important factor affecting the oil filter

replacement cycle.
Oil quality: High quality oil usually has better cleanliness and

antioxidant properties, which can extend the service life of oil

filters. On the contrary, low-quality engine oil may accelerate

the clogging and aging of the oil filter element.
To ensure the normal operation of the engine and extend the

service life of the oil filter, car owners should regularly check

the color and viscosity of the oil, and observe the appearance

of the oil filter for signs of damage or blockage. If you notice

that the engine oil has turned black, thickened, or has a strange

odor, or if the oil filter is severely clogged, it is necessary to

replace the engine oil and oil filter in a timely manner.

Tool preparation: Prepare the necessary tools for replacing the

oil filter, such as a wrench, funnel, container, etc.
Safety measures: Ensure that the motorcycle is parked on a

stable surface, turn off the engine, and wait for a period of time

for the engine oil to cool down. At the same time, wear protective

gloves and glasses to avoid oil splashing onto the skin and eyes.
Drain old engine oil: Find the drain screw at the bottom of the

motorcycle and loosen it to allow the old engine oil to flow into

he prepared container. Be careful not to let the engine oil splash

into the surrounding environment.
Remove the old oil filter: Use a wrench to unscrew the cover of

the oil filter and carefully remove the old oil filter. Be careful not to

let the oil from the old oil filter come out.
Install new oil filter: Before installing the new oil filter, a small

amount of new oil can be applied to its contact surface to ensure

sealing. Then, install the new oil filter element in its original

position and tighten it to the specified torque with a wrench.
Add new engine oil: Use a funnel to slowly add new engine oil to

the engine, while checking if the oil level is within the specified

range. Do not add excessive oil.

Product Paramenters

;/